The genset is pre-configured and includes installation, exhaust, battery, cables, fuel lines, chassis ground, and a full systems check was performed. Moreover, the generator is mounted on a custom-fabricated steel “stand” with fork entry points. For maximum operational flexibility, both the generator and the fuel cell can un-bolted from the container floor and moved onsite. This power system resides inside a compartment at the rear of the container, separate from the office/ workspace. Thus, this container has double container doors on both ends to allow for the closet set-in for Generator Set. As a result, the office space inside is around 14.5’ (101 sq ft) compared to 19’ 4” (135 sq ft each) on the other two office containers. plug is L-1430-P
All three containers are 7’ x 7’ wide and high inside, are FEMA compliant (meaning they have added rubber seals around the doors and air inlets on the sides so they can “breathe” and don’t get moldy), have vinyl laminate floors, finished walls with overhead lights, and a power panel.
Users can power the containers (or external equipment) at the flip of a switch using either shore power or autonomous power from the preinstalled 16.5K/ 68 AMP Mobile Industrial Kohler power diesel generator.
Users have the option to divert up to 68 Amps to external power equipment (on a site) both in tandem with the lights, AC/heat and contents in the containers or separately. (Note, if required, currently the fuel cell and generator can be un-bolted from the floor of the gen set cabinet, removed with a small fork truck or human power, and left at a different location than the containers if necessary to power external equipment).
- Each unit is outfitted with an 11800 BTU / 9.4 Energy Star rated heating/cooling unit.
- Titanium Container locks.
- Heta-wrapped muffler with baffle.
- Detachable fuel cell and generator.
- Fully sealed rubber gaskets, with stainless steel in the jams and CAM-style locking rods.
- Constantly recirculating walls for the generator.
- 36” x 80” metal, gasketed, lever-locking exterior door and vinyl framed, insulated, lever style windows with gas-insulation.
- In-set front wall for the door, window, AC unit and Data Input Circuit so high and low voltage remain separated.
- In-set front all also prevents any compression issues when sealed.
- Emergency Exit Lights (installed).
- Motion-activated halogen flood lights above each entrance for use at night.
- 6’ copper grounding rods.